Thank you for purchasing the Pro 300 espresso machine. In this manual, you should find everything you to need to operate and maintain your machine. Please read carefully before using your machine. And if we've missed anything, you always know how to contact us. Let's get started!
Machine Description
Included Accessories
- 1 portafilter 1 spout
- 1 portafilter 2 spouts
- 1 filter 1 cup
- 1 filter 2 cups
- 1 blind filter
- 1 cleaning brush
- 1 tamper
- 1 instruction manual
SETTING UP MACHINE
- Lift the water tank lid and remove water tank. Rinse it thoroughly before filling the water tank with cold, filtered, softened water and place it back into the machine. Close the lid.
- Plug the machine into an electrical outlet and turn the coffee switch and steam switch on by placing the metal switches in the upper position. The boilers are now being heated and the green and orange control lamps will come on. You will hear the pump filling fresh water into the boiler.
- Turn on the coffee switch. As soon as water is released through the brew group, turn off the coffee switch. The coffee boiler is now filled with water.
- Since a lot of water is used for the initial filling of the boilers, the water tank will need to be refilled with water.
- The PID-display indicates the current temperature of the coffee boiler. Should the water in the tank fall below a certain level, the machine will turn off automatically and the PID-display goes off and you will have to refill fresh water. The machine will heat up automatically again.
- If you have switched on the steam function, please wait until the pressure gauge reads a value of about 1.0 – 1.3 bars before use.
-
In general, the machine will be heated up in about 10 minutes but we recommend waiting about 12 before the machine is ready for use.
PID
The function of a PID-Temperature Control is to regulate the temperature of the coffee boiler. The
temperature of the boiler is programmable and controllable. The temperature, or rather the pressure of the steam boiler, is regulated by the pressure switch and is not adjustable from the outside.
PID stands for “proportional-integral-derivative”. The PID-control displays the temperature of the coffee boiler.
temperature of the boiler is programmable and controllable. The temperature, or rather the pressure of the steam boiler, is regulated by the pressure switch and is not adjustable from the outside.
PID stands for “proportional-integral-derivative”. The PID-control displays the temperature of the coffee boiler.
ADJUSTING TEMPERATURE ON THE PID
Now you're ready to start pulling shots! Check out our All About Coffee & Milk section to learn about steaming milk, latte art, our suggested starter espresso recipe, grinder dial-in tips and much more!
Helpful Links
All About Coffee & Milk | Pro 300 Articles | Water & Setup | Clive Blog
TECHNICAL SPECIFICATIONS
DIMENSIONS | |
---|---|
Height: | 15.5" (14.1" with the cup rail removed) |
Width: | 11.9" |
Depth: | 17.6" |
Weight: | 51 lbs. |
HOUSING | |
Material: | Stainless steel |
Drip Tray: | Stainless steel |
Drip Tray Cover: | Stainless steel |
Drip Tray capacity : | 32oz |
Drainable Drip Tray: | No |
WATER RESERVOIR | |
Reservoir or plumbed : | Reservoir |
Capacity: | 3 Liters/100 fl oz, makes approximately 25 beverages |
Material: | BPA Free Plastic |
Removable : | Yes |
Low Water Shutoff: | Yes |
STEAM WAND | |
Material : | Stainless steel |
No Burn (insulated) : | Yes |
Wand Movement : | Articulating, full rotation |
Steam Tip Holes: | 2 |
Optional Steam Tips: | Yes |
CONTROLS | |
Temperature Control: | Yes |
Display Type: | PID |
Pre-Infusion: | Yes |
Pressure Gauges : | 2, pump pressure and steam boiler pressure |
Low Water Warning: | Yes |
CUP WARMING TRAY | |
Material : | Stainless steel |
PORTAFILTERS | |
Material : | Chrome Plated Brass |
Type: | Commercial 58mm |
Quantity Included: | 2 |
Baskets Included: | Single and double |
GROUP HEAD | |
Bottomless Portafilter: | Available separately |
Type: | e61, lever activated |
Backflush: | Disc included |
Maintenance : | Urnex Full Circle or Cafiza backflush detergent |
BOILER DETAILS | |
Type : | Heat Exchanger |
Material : | Stainless steel |
Size: | 2 liter/67.6oz |
Watts: | 1400 |
Boiler Automatically Fill: | Yes |
Heating Element Access: | Accessible from side (boiler is horizontal) |
Insulated : | Yes, velcro wrap |
PUMP | |
Type: | Vibratory |
Recommended brew pressure: | 9 bar |
Adjustable brew pressure: | Yes |
OTHER DETAILS | |
Warranty: | 2 years |
Recommended Application: | Home or office |
NSF Certified for Commercial Use : | No |
Comments
0 comments
Please sign in to leave a comment.