Eureka Atom: User Manual

Thank you for purchasing the Eureka Atom espresso grinder. In this manual, you should find everything you to need to operate and maintain your machine. Please read carefully before using your machine. And if we've missed anything, you always know how to contact us. Let's get started!

Helpful Links

Dialing-In Your Grinder | All About Coffee & Milk | Eureka Articles | Clive Blog

Grinder Cleaning & Maintenance 

Manufacturer Manual in PDF

MACHINE MANUAL IN PDF

!! NOTE: ALWAYS KEEP YOUR ORIGINAL PACKAGING IN CASE OR RETURN FOR SERVICE !!

IMPORTANT: If the grind adjustment knob is turned by more than 3 notches towards 'FINE' with the motor stopped, the machine can get stuck and / or damaged. It is best to fine the grind up while the burrs are running. 

Before operating the appliance, insert the bean hopper into its seat (see Fig. 2), positioning it so that the hole lines up with the screw (9) on the back part of the appliance. Tighten the lock screw (9) (see Fig. 3).

After having plugged the appliance in, pull the tab (17) at the bottom of the coffee bean container (8) to close it (see Fig. 4). Remove the lid (7) from the hopper (8) and add coffee beans. Turn the switch (11) to the ON position (the led on the button). Push the tab (17) permitting passage of coffee beans.

FILTER HOLDER FORK HEIGHT ADJUSTMENT (Fig. 7)

• By using a crosshead screwdriver, loosen the fastening screw of the filter holder fork (15). It is recommended not to unscrew the screw completely.
• Raise or lower the fork in order to adjust it according to filter holder dimensions.
• Once having reached the correct position, tighten the fork fastening screw (15). The appliance is equipped with a filter holder retaining device.

DOSE DISPENSING AND SETTING (DISPLAY)

• By pressing the key for one dose (3)  this lights up and the cup on the display is filled (18) during dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The single dose counter is increased of 1.
• By pressing the key for two doses (5) this lights up and the cups on the display are filled (19) during dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The double dose counter is increased of 1.
• By pressing the increasing key (6)and decreasing one (2) the dispensing time of the properly selected dose is increased or decreased.

It is possible to manually stop dispensing by pressing the button (3) or (5) (depending on the delivery in progress). The machine pauses: 

• Press the dispensing keys to resume grinding started earlier.
• Press the button (4) to finish the grinding in progress.
  
  

"ESPRESSO & BREW" DISPENSING MODE ACTIVATION

By pressing the keys (4)  the continuous mode is activated.

To start dispensing: Press the key (4) to start dispensing and press it again to stop dispensing.

FUNCTIONING WITH FILTER HOLDER (Espresso) Insert the fork (15) into the slot (see Fig. 6) and fasten it in its holder. Preselect the single or double dose using the buttons (3) or (5) . Insert the filter holder on the fork (15) to press the (14) button to start dispensing from the nozzle (13). Dispensing stops once the preset time has elapsed.

FUNCTIONING WITH TANK (Filter coffee) Insert the tank (16) below the dispensing spout (13). Press the button (4)  to pass at the "Espresso & Brew" mode and press it again to start dispensing. The dispensing always end by pressing the button (4)

CLEANING AND MAINTENANCE 

***Unplug the appliance before performing any cleaning and maintenance operation.*** 

Cleanliness is a basic aspect for the proper functioning of the coffee grinder with a dosing unit. A neglected coffee grinder with dosing unit may have a negative impact on coffee dispensing as well as on the accuracy of dose and grinding. Before cleaning, make sure the appliance is unplugged. At least once a week, clean the coffee bean container (8), removing the oily coat left by coffee beans by means of a clean cloth.
It is furthermore necessary to often clean (several times a day) the dispensing spout (13) through a brush and a vacuum cleaner.
In case such operations are not carried out, the aromatic oily part contained in coffee may turn rancid with negative consequences on coffee, furthermore the lack of cleanliness may jeopardize regularity of the dose itself.
Clean the base by means of a damp cloth.