Below are photo instructions for removing the top and side panels from an Izzo Duetto to access the internal components of the machine. Tools required:
- 10mm wrench
- Phillips screwdriver
After this you'll want to locate and remove the 10mm screws attached to the front of the side panels.
Once the side panel screws are removed the side panels lift straight up off the machine, giving full access to the internals of the machine.
Comments
1 comment
Thanks you nailed it could you let me know why my pump has a noisy, I see that pump move back and for a little bit I guess it is normal? Do you know if this type of machine Izo IV duetto can be left connected for hours or there is some limit for the time that remain on, if there is any shut down like authomatic machine does if you are not using? thanks
Please sign in to leave a comment.