Installation Requirements
Slayer Espresso Single Group
Counter
| Width: | 18.5 inches / 47 centimeters |
| Length: | 23 inches / 58 centimeters |
| Height: | 13 inches / 33 centimeters |
| Weight: | 110 lbs / 50 kg (tanks filled) |
Measurements do not include overhanging wood components: portafilters, brew actuators, steam handles, cup rail
Water
- 3/8-inch BSP dedicated cold water line with shutoff valve (in North America, 3/8-inch compression fitting is included)
- Incoming water pressure: 3 Bar min, 5 Bar max
- Water hardness cannot exceed 50ppm, otherwise a water softener is needed
Power
| 100-120 volts AC, Single Phase | 12 Amps | |
| 1,500 Watts | OR | Standard grounded plug end included |
| 200-260 volts AC, single-phase | 9 amps | |
|
2,000 watts |
Receptacle: Nema 6-15 |
*Male plug end is included with 100-120 volt models or when UL specifications have been requested
Drain
- Open gravity drain located within 4 feet / 1.2 meters of the machine
- Ensure drain line is always sloping downwards
- Drain hose: 7/8-inch outside diameter, 5/8-inch inside diameter (2.2-centimeter outside diameter, 1.6-centimeter inside diameter)
Comments
0 comments
Please sign in to leave a comment.