Below are photo instructions for removing the coffee temperature probe from a Duetto. This is useful for replacing a temperature probe or for descaling the probe. Before doing this, make sure you machine is cooled off, unplugged and has no water line pressure. In order to reach the probe you will need to remove the panels from the machine, we have a walk through for that here. Tools required:
- adjustable wrench
When reinstalling be sure to turn machine on and check for leaks. It is helpful to do this before reinstalling panels so you can see leaks and deal with them easily.
Comments
3 comments
Any tips for removing the nut on the temperature probe. Ours won’t budge.
Hi Sandra!
As soon as you get it to break free a little bit it will begin to unthread freely. Usually what we will do is set the wrench perfectly in place and give a forceful tap with our other hand to apply a lot of force for a very short period. This will break the seal of the threading but won't cause any issues with the rest of the boiler system.
Let me know if that resolves your issue!
Got it! After a week we are back up! Thank you!
Please sign in to leave a comment.