Below you will find instructions for replacing the coffee boiler element in the LUCCA M58.
Tools Needed:
- 7mm Wrench
- 29 or 30mm Socket + Impact Driver
1. Drain the boilers by following along with our instructions here: Draining M58 Boilers.
2. Remove the wires and grab your socket. We use a 30mm socket here at Clive but a 29mm may also fit just fine.
3. Replace the element and the gasket if you have a new one and test the machine for any leaks. If it is leaking simply tighten down the element a little more.
Comments
0 comments
Please sign in to leave a comment.